VIA
VT64xx/ VT8237(x) ComboRAID Driver(4.x)Installation
Guide
Updated:
2006-05-30
. Application License
Agreement
. Distribution
Package Contents
This README file provides information on VIA
VT6410, VT6421, VT8237R/R Plus SATA software packages.
VIA Technologies assumes no responsibility
for any errors in this document and no part of this document may be reproduced,
transmitted, or translated into any language, or in any form without the prior
written permission of VIA Technologies Incorporated.
n
VT6410 IDE/RAID Adapter
u
It is a RAID controller that
supports RAID 0, 1, 0+1 and JBOD.
u
It also supports up to four IDE
hard disk drives.
n
VT6421 SATA RAID Adapter
u
It supports two SATA HDDs + Two IDE HDDs.
u
It supports RAID 0, 1, 0+1 and
JBOD functions.
n
VT8237(x)
u
It is a south bridge which includes
VT6420 SATA controller so this software package also supports VT8237(R/A) SATA
controller.
u
It supports RAID 0, 1, and JBOD
functions.
This "VIA RAID Software Package" is used
to install the drivers and utility which are needed for using the VIA VT6410,
VT6421, VT8237(R/R Plus) SATA
RAID controllers.
The supported platforms are described in System Requirement
section.
Please read carefully before you download, install,
or use any VIA SOFTWARE. VIA SOFTWARE means the software program you are
currently trying to download, and all related updates supplied by VIA
Technologies, Inc. (VIA).
By clicking on the I ACCEPT button, and by downloading and installing the VIA
SOFTWARE, you accept all the terms and conditions of this Agreement. If you do not agree to the terms and
conditions of this Agreement, do not click the “I ACCEPT” button or use the VIA
SOFTWARE.
Upon your acceptance of this Agreement, subject to
the terms and conditions set forth herein, VIA hereby grants to you a limited,
non-exclusive, non-transferable, worldwide license to use the VIA SOFTWARE as
follows:
1.
Use of Software. The VIA SOFTWARE is licensed for
personal use and may only be used in conjunction with VIA products. If
you wish to use the VIA SOFTWARE for
commercial or any other purpose, please contact VIA directly.
2.
Restrictions. You are not allowed to modify, disassemble, decompile, or
reverse-engineering the VIA SOFTWARE, or remove any proprietary notice or label on the VIA SOFTWARE. You may not transfer or distribute this software to
any third party.
3.
Ownership and Copyrights. The VIA SOFTWARE and the
accompanying documentation are licensed, not sold, to you. All title and
copyrights in and to the VIA SOFTWARE (including but not limited to all images,
photographs, animations, video, audio, music, text, and other
information incorporated into the VIA SOFTWARE), the accompanying printed
materials, and any copies of the VIA SOFTWARE, are owned by VIA, or its third
party suppliers. The VIA SOFTWARE is
protected by copyright laws and international treaty provisions.
1.
Disclaimer of Warranty. VIA MAKES NO REPRESENTATIONS
ABOUT THE SUITABILITY, USE, OR PERFORMANCE OF THE VIA SOFTWARE
FOR ANY PURPOSE. THE VIA SOFTWARE IS PROVIDED "AS IS," AND VIA
DISCLAIMS, TO THE MAXIMUM EXTENT ALLOWED BY APPLICABLE LAW, ALL EXPRESS OR
IMPLIED WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NONINFRINGEMENT WITH
RESPECT TO THE VIA SOFTWARE. VIA IS NOT OBLIGATED TO SUPPORT OR ISSUE UPDATES
TO THE VIA SOFTWARE.
2.
Limitation on Liability. TO THE MAXIMUM EXTENT ALLOWED BY
APPLICABLE LAW, UNDER NO CIRCUMSTANCES SHALL VIA BE LIABLE TO YOU
OR ANY OTHER PERSON FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES OF ANY CHARACTER INCLUDING, WITHOUT LIMITATION, DAMAGES
FOR LOSS OF GOODWILL, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, OR ANY
AND ALL OTHER ECONOMIC LOSS OR COMMERCIAL DAMAGES ARISING OUT OF THE USE OR
INABILITY TO USE THIS VIA SOFTWARE, EVEN IF VIA HAVE BEEN INFORMED OF THE
POSSIBILITY OF SUCH DAMAGES.
3.
Export Controls. By clicking on the "I
ACCEPT" button, you agree that the VIA Software will not be shipped, transferred,
or exported into any country or used in any manner prohibited by the United
States Export Administration Act or any other applicable export laws,
restrictions, or regulations.
4.
Termination. Your license will automatically terminate without notice from VIA upon
any failure by you to comply
with the terms under this Agreement. Upon termination, you must cease
all use of the VIA SOFTWARE and destroy the VIA SOFTWARE along with all copies and merged
portions in any form.
This package should be
installed on the system with VIA
This software package only supports
Microsoft Windows© Platforms. The setup program will detect the current
platform and install proper driver on your system. The supported platforms are
list below:
Windows 98SE
Windows Millennium
Windows NT4 Plus service packs
6
Windows 2000 RTM and above
Windows XP RTM and above
Windows Server 2003 RTM and above
Windows XP-x64 RTM and above
Windows Server 2003 SP1-x64 RTM and above
The setup program will
display the released data and version for this package at dialog title.
There is specific
version syntax for package identification:
The X is the major version of this package; and YZ
represents the minor version.
The alphabetic is always appended after version
field to represent the qualification by Windows Hardware Qualification Lab. The
A means the first package for the same driver binary, B means the second
released package for the same driver binary, and so on.
In this section, we show the detail file
list of ZIP-compressed package in which include setup and driver files.
0X0409.INI, INSTMSIA.EXE,
INSTMSIW.EXE,
ISSCRIPT.MSI,
License.rtf, PCIENUM.SYS,
README.TXT, SETUP.EXE,
Setup.ini, SETUP.ISS,
SETUP.MLF, SETUP.SCF,
viasetup.dll, VIASetup.msi Readme.html
English.slf, asia.slf, europe1.slf, europe2.slf
europe3.slf, 165x300.bmp, 500x60.bmp
viarAID: rAID dRIVER FILES
VIARAID\component.cif, VIARAID\MRAID.DLL, VIARAID\RAIDDRV9X.DLL,
VIARAID\RAIDDRV.DLL, VIARAID\InsMRaid.exe
Driver files: VIARAID\DRIVER
Windows
2000, XP and Server 2003
wINxp\vIAmRAID.SYS |
|
WINxp\VIAmRAID.INF |
|
Windows
XP and Server 2003 AMDx64
x64\vIAmrx64.SYS |
|
x64\VIAmrx64.INF |
|
Windows
NT4
winnt4\vIAmraid.SYS |
|
winnt4\VIAmraid.INF |
|
Windows
98SE, Millennium
win9x\vIAmraid.mpd |
|
win9x\vIAmvsd.vxd |
|
win9x\VIAmraid.INF |
|
RAIDTOOL:
RAID Management Tool files
RAIDTOOL\component.cif, RAIDTOOL\RAIDUTL.DLL,
RAIDTOOL5\RAIDTULNT.DLL
Tool
files: RAIDTOOL\UTILITY
Main
program
RAIDTOOL\UTILITY\rAID_TOOL.EXE |
|
RAIDTOOL\UTILITY\rAID_TOOL.CHM |
|
raidtool\UTILITY\eRRlIST.MLF |
|
Interface
DLL
RAIDTOOL\UTILITY\Win2000-xp\drvinterface.dll |
|
RAIDTOOL\UTILITY\WINNT40\ drvinterface.dll |
|
RAIDTOOL\UTILITY\WIN98-ME\ drvinterface.dll |
|
There are two operation modes, Windows UI and command line, to execute
installation and remove. The most popular is the Windows UI mode that provides
convenient user interface and systematic operation. The command line mode, also
called as silent mode, need user append more parameters behind SETUP.EXE as
answer to make the setup program silence without pop any dialogs.
There are possible two types setup package you may have. One is
compressed as a zip file includes visible setup and driver files. Another one
is made as a self-extracted-execution file. In the following, we will show you
the steps to complete driver installation and remove with both package types.
If the downloaded file is
ZIP-compressed format, please extract it to proper location in your hard disk
first. Then launch the SETUP.EXE by double-clicking. Otherwise, you could
double-click the self-extracted-execution file and wait for few seconds for the
self-extraction. The extracted file will be deleted automatically after setup
has been terminated.
If it is the first time to
execute the setup package, you will only have the choice of installation.
After the first time
execution, you could have choice to make Update and Remove. You will see two
options, Update and Remove in the first shown dialog. If you are going to
update the driver, please active the Update radio button and press next button
to enter next steps. Else, if you are going to remove the installed driver in
your system, please active the Remove radio button and press next button to
enter next steps.
There is another path to
remove the installed driver is to go through “Add Remove Programs” service of
control panel. An uninstall item is added after install ,
VIA Platform Device Manager, to handle all the installed VIA driver components.
You could select the VIA IDE Bus Master item in the list box of Remove option.
The silent mode are usually
applied to system maintainer for servicing hundreds systems that wont have
interactive user interface. They would execute the setup through command line
in console or batch file execution without closing any popped dialog popped or
pressing next buttons. In addition, the command line parameters of these two
types of downloaded file format get few differences.
In this type package, you
could see a setup.exe in those extracted files. User could append parameters behind
setup.exe as command line in console.
The
present command line parameters are: -s and /z"reboot;remove;kompnt:xx,yy,zz"
Parameter |
Description |
-s |
It
is a required command line parameter to enable silent mode operation. If this
parameter is missed, the setup |
-zParam1;K;ParamN |
It
passes predefined parameters to SETUP.EXE. Each parameter, Param1;K;ParamN, should be separated with semicolons. The
predefined sub-parameters are: reboot It causes Setup.exe automatically to reboot after the silent mode
operation completed. remove It is a switch to cause Setup.exe to remove components. If
this parameter is absent, then SETUP.EXE will install components. kompnt:xx,yy,zz It is an optional parameter to
assign specific component in this package to be install/remove. The xx,yy,zz
should be replaced with component name in which is defined as same as the
component folder name of this package. |
Examples:
Command
line |
Execution
|
setup.exe
-s |
Silent
install all included components but not reboot the computer. |
setup.exe
-s /z"reboot" |
Silent
install all component and reboot the computer. |
setup.exe
-s /z"reboot;remove" |
Silent
uninstall all include component and reboot the computer. |
setup.exe
-s /z"remove" |
Silent
uninstall all components but not reboot the computer. |
This
type is a single self-extracted-execution file. All necessary files are all integrated
together so that user does not need to extract it to specific folder for
operation. There is extra parameter to make the self-extracted shell to be in
silent mode.
The
present command line parameters are -s -a, -s and /z"reboot;remove;kompnt:xx,yy,zz"
Parameter |
Description |
-s
-a |
It
is a required command line parameter to make the self-extracted shell program
to be in silent mode. And it should be the first parameter in command line. |
-s |
It
is a required command line parameter to enable silent mode operation. If this
parameter is missed, the setup |
-zParam1;K;ParamN |
It
passes predefined parameters to SETUP.EXE. Each parameter, Param1;K;ParamN, should be separated with semicolons. The
predefined sub-parameters are: reboot It causes Setup.exe automatically to reboot after the silent mode
operation completed. remove It is a switch to cause Setup.exe to remove components. If
this parameter is absent, then SETUP.EXE will install components. kompnt:xx,yy,zz It is an optional parameter to
assign specific component in this package to be install/remove. The xx,yy,zz
should be replaced with component name in which is defined as same as the
component folder name of this package. |
Examples:
We assume that you download
a self-extracted-execution file named as VIAAGP.exe.
Command
line |
Execution
|
VIAAGP.exe
-s -a -s |
Silent
install all included components but not reboot the computer. |
VIAAGP.exe
-s -a -s /z"reboot" |
Silent
install all components and reboot the computer. |
VIAAGP.exe
-s -a -s /z"reboot;remove" |
Silent
uninstall all included component and reboot the computer. |
VIAAGP.exe
-s -a -s /z"remove" |
Silent
uninstall all components but not reboot the computer. |
Under Windows 2000 and later OS, while user intends to install OS on the
disk attached on the RAID controller, they have to prepare a floppy driver disk
including the pre-OS installation files and press “F
The driver disk files had been prepared in this package. Please follow
the steps to prepare it.
1.
Make sure the target system is
already install floppy drive
2.
Prepare a empty and valid
floppy disk
3.
Copy all files under \DRVDISK
to the floppy without losing
4.
Power on the target machine and
boot from the Boot CD. And press “F
5.
After the booting process ask
you to insert the floppy disk, please insert the prepared floppy disk to the
floppy drive and press enter
6.
Choose the proper item to fit
the OS and RAID controller you are installing. Each item shows the matched OS
for it.
The
default-supported language in this package is in English.
If the
executed Windows OS is in an un-supported language to this package, the user
interface will be represented in English.
This setup
package support 33 languages as below
Chinese(Simplified), |
Chinese (Traditional), |
Indonesian, |
Japanese, |
Korean, |
Russian, |
Thai, |
Turkish. |
|
Basque, |
Bulgarian, |
Catalan, |
Croatian, |
Czech, |
Danish, |
Dutch, |
English, |
Finish, |
French( |
French(France), |
German, |
Greek, |
Hungarian, |
Italian, |
Norwegian, |
Polish, |
Portuguese(Brazi), |
Portuguese( |
Romanian, |
Serbian, |
Slovak, |
Slovenian, |
Spanish, |
Swedish. |
|
|
All the language sequence is arranged as
alphabetical.
Limitation:
þ
RAID5
solution for VT8251 only supports Windows 2000 and later version. Win9x, NT4
platforms are not supported.
Application Compatibility:
þ
“Everest
and SpeedFan” program has problem on their coding
that could not display the information of disks connected on VIA Storage Host.
All copyrights are reserved by VIA Technologies,
Inc. http://www.via.com.tw/